Ideal for conveyor transfer on production distribution, assembly, packing and shipping lines
At the flip of a switch
Omtec Pop Up Ball Transfers raise above the conveyor rollers to move items on or off to an adjoining conveyor, workbench or cart with… minimal effort!
Omtec Pop Up Ball Transfers when retracted are below the rollers and won’t interfere with normal straight line flow of items not being transferred.
Why not use fixed conveyor ball transfer tables? Ball transfers are useful solutions for many applications, but conveyor line ball transfer tables can cause items to swerve and change direction. This means someone is required to guide items while on the ball transfer table.
However when the Omtec Pop Up Ball Transfer Strips are retracted below the conveyor rollers, they do not require an operator to be present for items not being transferred. Items moving on the conveyor, do so uninterrupted by the ball transfers.
If your application requires standard fixed ball transfer tables Click here: Conveyor Ball Transfer Table
Easy to install, economical, minimal effort, conveyor transfers.
Omtec Pop Up Ball Transfer Strips are available infinite lengths to fit virtually any conveyor frame width. Ball transfers may be on any center lines with a minimum of 2 inches (50.8mm). Ball center lines on a strip may also vary, ball to ball.
Omtec Pop Up Ball Transfer Strips fit virtually all powered and non-powered roller converyors.
PBT Ball Transfer Strips fit between or in place of rollers.
- Items move along the conveyor line on the rollers to a position over the Omtec Pop Up Ball Transfer Strips.
- Operator raises Omtec Pop Up Ball Transfers, with minimal effort moves the item onto the adjoining conveyor line, table or etc.